GnG Gel Blaster Trigger Switch Fixing Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This firmly holds in place G&G gel blaster's trigger switch, that otherwise can be pushed forward and stop functioning.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Share Alike
G&G Gel Blasters, in addition to their very sturdy outer shell, come equipped with an ETU and a trigger switch that connects to the motherboard via just three flimsy pins. If you pull the trigger too hard, these pins can bend, causing the switch to shift forward and preventing the trigger from functioning properly.
The solution is a small plastic block inserted between the switch and the front wall of the gearbox. This prevents the switch from moving forward under pressure.
Nevertheless - do not squeeze the trigger too hard, as the gearbox is made of plastic and could crack!
There’s no need to glue the block in place - it should fit snugly and stay secure once the gearbox is closed.
This particular piece was designed for an ARP9 replica, but it should be compatible with other G&G models as well.
Print in ASA or PETG.