Mace Windu Brick Figure (500% Scale)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of pieces that can be used to create Mace Windu from the Prequel Trilogy
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Filament Used:
Polyterra Matte Peanut
Polyterra Matte Charcoal Black (Though you could use Bambu Charcoal Black as well)
eSUN PLA+ Brown
Elegoo PLA Beige
Bambu PLA Matte Dark Chocolate
Bambu PLA Basic Silver
Bambu PLA Translucent Purple
Settings:
Use Arachne wall generator for the chest piece and print on a smooth PEI sheet with one wall on first layer for best results.
For the lightsaber, I had issues printing it so I slowed the outer wall down to 40mm/s, used 5 bottom layers, a 10mm brim and 0.05mm distance between object and brim. Also turn on scarf wall and put the seams in the back. 2 walls gives it a good color. I also upped the bed temp for this to be 55C on the first layer and 60C for the remainder.
Other notes:
The eSUN brown is used for the skin and the Bambu dark chocolate is used for the belt color on the chest piece. The Elegoo beige is used for the undershirt on the chest piece. Polyterra peanut is used for the robes.
Normal grid supports for anything that needs supports.