1 / 2
Rode Procaster or Podcaster Pop Filter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An offset pop filter for Rode's end address dynamic mics.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 44
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
Print with 35% Gyroid infill, 4 perimeters, and turn off top and bottom infill layers. You can also just use the provided 3MF project with the settings already applied.
In addition, you'll need a 3mm rod or wire of some kind, of about 85-100mm. I've found that the 90mm range offers the bed performance. Due to shrinkage, the rod will require a bit of gentle encouraging to get in the holes, but that keep it in place.
Note: this may or may not work with the Broadcaster, unfortunately I don't have one to test it with