Case For Raspberry Pi 5, Waveshare PoE Hat F And Pineboard Hatdrive! AI
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another very specific case for your Pi
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 77
- Makes
- 0
- Views
- 854
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This model is a case for the Raspberry Pi 5, Waveshare PoE Hat F and the discontinued Pineberry Hatdrive! AI board, which can still be found stocked at some retailers. There are two lids available currently, both with a vent for the fan and one with a hole for camera cables.
The following electronics and hardware are needed to build this model:
Pineberry Hatdrive! AI (discontinued)
12x M2.5 heat set inserts
12x M2.5x8 screws
4x M2.5x12 screws
8x M2.5 washers
The build guide is available as a PDF under the Files tab above.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨