1 / 1
Bulma Dragonball HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Model is 180x240mm in size
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 62
- Makes
- 0
- Views
- 508
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA eSun Beige Transmission Distance: 4.5
PLA PolyTerra Cotton White Transmission Distance: 1.5
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #14 (1.2mm) swap to Beige
At layer #23 (1.92mm) swap to Cotton White for the rest.