Filament Dust Filter with Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Everything gets better with a magnet, even the legendary Sneakypoo's filament dust filter! Multiple tolerances!
- Rating
- 4.75 / 5
- Likes
- 158
- Downloads
- 442
- Makes
- 4
- Views
- 2,576
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When you have a Prusa CORE One, or some other printer with a metal shell, everything gets better with a magnet!
So I made a remix of a remix of the original Sneakypoo's model of the filament filter, housing one 5x2mm neodymium magnet, but you can also use a slightly thinner or a thicker one. I also made multiple tolerance options, allowing you to choose the one that best suits your setup.
Just cut out two small pieces of sponge and place one in each half. Now you can insert and remove the dust filter even with the filament already loaded.
Print-in-place with 0.20mm layer height or finer. I usually print T100 tolerance version in Prusament PETG on a Prusa CORE One with 0.40mm HF nozzle.