Aztec Sacrifice
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
Project: human-sacrifice-of-the-aztecs_u-l-q1kiukl0.jpg
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 89.42x119.05mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Grey
Border Only Colors from here until the end.
At layer #20 (1.68mm) swap to White for the rest.
(Optional layer #30 swap to black for frame)