1 / 5
KiK Keyway Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Key-In-Knob (KiK) cylinder holder designed to feel like holding a padlock while practicing. Gridfinity compatible base.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Works well with the Kwikset cylinders I got from LockpickExtreme but will probably work with other cylinders of a similar size. The hole in the bottom fits a plug follower to make it easier to remove cylinders that get too snug.
Sits into a Gridfinity base but only fills half of it so you need two side-by-side to work best.
About 15% infill should be fine. No supports needed. Brim is optional but might help if you don't have good adhesion.