Breville Barista Pro Bean Hopper Extension (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 45mm extension of the bean hopper to hold a full pound of beans. Parameters can be adjusted to fit your needs.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 118
- Makes
- 0
- Views
- 1,101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I usually buy my beans in a one pound bag. The Barista Pro's hopper holds less than half of the bag. A 45mm extension expands the capacity and still fits under my upper cabinet. I have included a single color option in both STL and 3MF. Also included is an MMU version with the Breville logo as well as the STEP file if you need to adjust parameters.
The STEP includes a second text option to personalize the print. Just edit the sketch and replace the text with your own. The Breville logo is an SVG and will not move with parameters. (something I learned with this model). The constraints are unlocked, so you will need to manually move it in the sketch if you choose a height less than 30mm and want the logo. I provided construction lines for point to point movement.
Available parameters:
- Height
- Lip
- Lip recess
- Lip Offset
- Outer and Inner Diameters
I printed in both 0.20mm and 0.30mm without issue. No supports needed.
I do plan on editing the design to accept a piece of TPU along the bottom lip to keep it from spinning, but it functions well without it.