Tibber Pulse CT holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Outdoor Tibber Pulse CT holder to fix poor connection with the Homevolt battery
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder that makes it possible to move the Tibber Pulse CT out of the outdoor electrical distribution cabinet to get a stabile connection with the Homevolt battery.
I also use the same holder but with a longer foot too move the Tibber Pulse CT connected to the Solar-panels to a location with much better signal quality.
For best signal strength, turn the backside, the side with the black magnetic circle, of the Pulse CT towards the Homevolt battery.
NOTE: The pointy part of the foot, where the single screw hole is, should face up
When the holder is used outside choose a filament with good UV-resistance, preferably PCTG or ASA. If you use PETG you will probably need to replace the holder in a few years.