Aircraft panel adapter for RAM X-Grip (Lansdcape mode)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to mount a RAM X-Grip Universal Holder for 9"-11" Tablets at an angle on an aircraft panel
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Many light aircraft pilots in Europe use a tablet computer running SkyDemon to display a moving map that shows current position with flight planning data, airspace restrictions, NOTAMs and traffic detected by a Pilot Aware or other EC device. For RV12iS and similar home-built aircraft that do not have the optional second EFIS unit fitted, this adapter secures a RAM X-Grip Universal Holder to the right hand instrument panel in the horizontal orientation, tilted at an angle of 12deg towards the pilot. If required, the angle can be adjusted in the OpenScad design and the .3mf file re-generated from the modified model.
As aircraft cockpits can get quite hot I suggest printing it in nylon or PETG. Weight of the model (printed in PETG using 20% triangular infill and 0.25mm layer height) plus X-mount plus the fixings I used was just under 0.6kg.
Make sure that whatever mountings you use on the rear of the panel are not in danger of abrading any wiring behind the panel.