Swiveling shower head holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Swiveling shower head holder for van and camping car sink.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I originally designed this swiveling holder to accommodate the shower-head in my van's sink.
In its current dimension this is meant to fit:
The concept is simple:
- pass hose through the hole in the sink
- slide it through the “shower holder” cutout
- screw the left and right part tight around it. I used two m2 heat insert (m3 should fit as well)
- glue it above the sink's hole (I used sikaflex)
The ball diameter is made 0.2mm larger than its enclosing sphere to create a base level of friction. In addition, with the slightly conic shape of the hose and holder, pressing the shower head further in acts as a spring and increases the diameter of the sphere causing more friction.
The original onshape file is here if you wish to alter the dimensions.
Printed in PETG on an Ender3 with a 0.6mm nozzle. No support required, add a brim.