Gaggia GaggiMate Pro PCB covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shortened for better fitment of the funnel
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 130
- Makes
- 0
- Views
- 631
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I modded the original cover to mimic the new open cover that comes with the kits. This is modded off the STL so there are small imperfections. I test fitted this on versions 1.0 and 1.1 of the pro PCBs. The top part is thicker for structure, you can set negative Z in the slicer to make it thinner.
There is also a modified base with magnet holes.
Someone created a better version of the original full cover here which in addition to being shorter also has more of a slope so I recommend using that one if you need more room.
When installing the Gaggimate PRO PCB in the Gaggia Classic E24 I was just a couple of mm short on space. This mod allowed me to fit the funnel and have magnets on the base of the enclosure. This model has 2mm taken out of the height, there is still room for the PCB and wires on the inside.
Link to the Gaggimate project on Github