Auto-Rewinder for Sunlu Filament Dryer S2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I own this filament dryer and wanted to add an auto-rewinder to it for my MMU3, similar to what Jim Nanago had done.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 52
- Makes
- 1
- Views
- 1,132
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need the following to complete this:
Printed Parts:
| Number to Print | STL File Name |
| 1 | Screen Side Bracket |
| 1 | Side Bracket |
| 2 | Crossbeam |
| 1 | IntegratedRewinder_v5.6_75 |
| 1 | Axle v1 |
You will also need
(4) M3x10 screws to attach the Crossbeams to the Side Brackets.
(2) 608 bearings for the IntegratedRewinder
Please note that the Crossbeam has a side with a smaller cylinder on the outside. This side should be opposite of the Screen Side Bracket when attaching.
When inserting the built rewinder holder into the Filament dryer, insert the screen side bracket in first, similar to how the rods+bearings that the dryer came with are installed.