1 / 1
Noctua Deskfan with NA-FC1 for 120mm fans — image 1

Noctua Deskfan with NA-FC1 for 120mm fans

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This project is a collection of files that you can use to turn any 120mm PC fan into a deskfan.

Rating
3.5 / 5
Likes
18
Downloads
119
Makes
1
Views
797
Reviews
2

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I had a spare 120mm Noctua fan simply just sitting around, so I figured I would turn it into a deskfan to help with the hot summer months.
I wanted to have variable speed control and also power it from the wall, and this project is the result of that work.

This project uses the Noctua NA-FC1 mounted on the side of the base to control the fan speed, or turn it off when desired. The fan itself can be pitched up or down on the hinge.

If you don't like the power cable coming out from the front, you can quite literally tilt the fan on the hinge to the other side, and spin the entire thing around.

What you will need:

  • Power Source (You can use wall power or batteries if you want)
  • Noctua NA-FC1 Fan speed controller (and the extension cable)
  • Any 120mm 4pin PWM PC Fan
  • 4x M4x40 Bolts
  • 4x M4 Nuts
  • Basic soldering or electronics skills for the Power Source.

Assembly

Attach the Base and Grill together to form the frame. You will need to use a bit of force for the hinge to snap in place. It should feel fairly stiff, and hold it's position easily.

You can also lay the fan down on the grill at this point. You can run the cable underneath to keep things simple.

 

Attach the NA-EC1 Extension cable included with the NA-FC1 to the controller, and route it through the larger hole. The Noctua text on the NA-FC1 should be upside down, use this image as a guide.

Now, firmly press the NA-FC1 into the hole, it should stay inside with friction alone. Make sure the controller lines up with the hole for the fan cable as well.

 

Finish the assembly by installing the 4x M4x40 bolts and nuts along with the airflow amplifier, and plugging the fan cable into the NA-FC1 Controller through the open hole. 
You should be left with a completed desk fan, and a 4pin cable coming out from it.

 

Power supply:

NOTE: This section is going to differ depending on what you're using to power the fan.

If it wasn't apparent by now, you will have to provide your own power supply. You can use whatever power source you want, I personally have used a 12v / 1A DC Powersupply, and adapted it to the 4pin connector.
You don't have to do this step exactly like I have, and you're free to do this step however you see best fit your situation, but here's a picture of my solution.

Tags