Wall Mount Bottle Opener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mounted bottle opener disguised as the open source hardware symbol. I call it the OPEN BOTTLE symbol.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 112
- Makes
- 3
- Views
- 871
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Here's the open source hardware symbol bottle opener, or OPEN BOTTLE SYMBOL.
There are two color changes. Start with black or your background color, switch to the primary color (yellow in my sample), then finish with black again. I used Galaxy Black fyi.
When it's done insert a US quarter dollar or similar coin in from the back. It should be tight, so use a tool to fully seat it. The center section has reinforced infill. That's why it takes a good amount of time to print this part. Use a drywall screw to attach to the wall through the center hole.
Note: The color change from black to yellow happens 1 layer before the hex infill finishes so that you can faintly see the hex pattern. Move the color change layer up 1 if you prefer to not highlight the infill as much. If you use your own settings, the Infill Angle should be 30 degrees, not 45.
Please post a pic of your Make.