1 / 3
Leg extender for Alesis Nitro Mesh E-Drum Kit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For tall drum players, this is a simple design that fits the legs on the Alesis Nitro Mesh E-Drum kit.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 55
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
You'll need 4 of these, one for each leg. You can probably reduce the strength a bit to save time and filament. I set my infill to 8% (normally 15%) and it worked fine.
Remove the rubber foot from the original leg and put it on the bottom of the extension, then slide the extension onto the leg. You might need to wrap a piece of tape around the original leg in order for it to fit snugly but it's pretty close. Raises the entire drum set 5 inches. The stl can be easily modified to suit your height.