1 / 3
🧽 Sponge holder for sink (double or single sided)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.58 – €1.93 net (excluding VAT)
For file: sponge-holder-single_0.3mm_PETG_MK3S_1h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.76 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 1.56 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Double or single sided sponge holder. Simple easily adjustable Blender geometry.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 357
- Makes
- 1
- Views
- 903
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Info:
- I have remixed original from Stevehlau (thx for idea & great design!)
- I have remodelled it in Blender:
- very simple geometry, so anyone can adjust it to different dimensions (every sink is different)
- it consists only from <50 vertex points, the rest is done by modifiers → easy changes
- my sink has wider separator part (and there is bigger angle)
- also my sponges are in general bigger
- very simple geometry, so anyone can adjust it to different dimensions (every sink is different)
Dimensions:
- see basic dimensions on screenshot
2 versions:
- both sided
- single - well, i solved this only by adding negative volume in Slicer, I dont think there is a need for different stl file :)
Print instructions:
- easy print, PETG
- probably try to print first only part for testing, if it fits your sink & sponge
- add⛔ negative volume in Slicer to print for example only 2mm high holder
- ℹ i have left negative parts in 3mf file, you can just drag&drop them, if needed
- adjust model (in Blender or just scale in Slicer)
- 🔁 repeat
- add⛔ negative volume in Slicer to print for example only 2mm high holder
Assembly:
- cut off brim with razor blade knife