BKHD-N100 Nas case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NAS case, based on BKHD-N100 NAS motherboard with expansion board
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 93
- Makes
- 0
- Views
- 1,516
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Motherboard:
Aliexpress link #1
Aliexpress link #2
Intel N100 (4 cores, up to 3.4GHz, 6W TDP)
1xDDR5 4800MHz, up to 16GB
M2 2280 for NVME SSD (PCIe 3.0 x1)
MiniPCI for Wi-Fi/BT modules
Two USB3.2 Gen2 + one USB2 + up to 4 USB2.0 from on-board connectors.
Two 2.5GBps LAN ports
HDMI and DisplayPort interfaces
5.5x2.5mm power connector, 12 to 24v, 3A minimum. You can use regular power supply for notebooks (19v, 4A+)
Expansion board:
AMS1166 PCIe-to-SATA bridge, 6 SATA-III ports (Bandwidth limited to PCIe 3.0 x2 ~2Gbit/s)
Two M2 2280 (PCIe 3.0 x2 each)
3x 4-pin PWM connectors for fans (1.25mm pins)
Notes:
Fan connectors is a regular 12v PWM interfaces, but smaller in size. Just make "adapter" from "JST 1.25mm" connectors: Aliexpress
I use brass nuts for M3 bolts: Aliexpress (M3x4x4.2mm)
I ran out of black plastic, so I printed in green.
Expansion board have blue+red LEDs for indicate connection and disk activity. If you print HDD holders with transparent plastic (PETG) - you can see these lights.
All parts fits in 240mm printing bed.
Fans (x2) ID-COOLING NO Series [NO-8010-PWM] or any other 80mm 12v 4-pin PWM fans
TODO:
The rear wall needs to be redesigned: Add a "door" or move the mounts so that you can access the two M2 slots on the expansion board.