Kitchen/bathroom faucet 11mm wrench
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.69 net (excluding VAT)
For file: kluczyk2_0.25mm_PLA_MINI_43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 43.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Small wrench for easy tighting of faucet 11mm nut under the sink. Short and long versions to choose from.
- Rating
- 4.2 / 5
- Likes
- 35
- Downloads
- 189
- Makes
- 6
- Views
- 887
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Small wrench for 11mm nut which is used to hold kitchen or bathroom faucet.
For easier mount I also printed a 40mm bushing because threaded rod was very long.
I've uploaded few versions of this wrench. If you use bushing then it's probably OK to use short version.
Short, 50mm, 65mm and 80mm version of the wrench.
Threaded rod - 8mm
Nut M8 11mm
Gcode file: 50% infill around the nut and 10% infill around upper part of the wrench for maximum saving of the filament. The part is very strong with these settings.
PS. if you need 12mm version you can request it by comment.