Dragonfly Paint Splatter v2 Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dragonfly hueforge with a paint splatter graffiti style
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Red Transmission Distance: 6.1
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #12 (1.04mm) swap to Red
At layer #17 (1.44mm) swap to Pure Yellow
At layer #21 (1.76mm) swap to White for the rest.