HSW x Gridfinity Baseplate Hybrids
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A combination of Hexagonal Storage Wall and Gridfinity Baseplates to give almost limitless storage options and solutions
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 93
- Makes
- 1
- Views
- 199
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Were you looking to put something horizontal on your HSW setup but you were frustrated at the lack of flexibility of some of the options available that were difficult to scale and customise?
I've combined HSW lugs with Gridfinity Baseplates to give you an almost limitless combination of great storage ideas and solutions.
The lugs are unapologetically tight and are 13.3mm across the width (flat to flat) and fit within the size requirements and specifications of the originals created by RostaP.
They are 10mm deep which push nicely (if not very firmly) into the HSW wall plate fixings. The reason I have created them so tight is because of the potential increase in leverage using Gridfinity bins with heavier objects. If they are a little tight for so, simple sand them down a little for a looser fit.
All lugs are spaced at exactly 40.8mm to also fit the HSW layout exactly.
Obviously the lugs only make contact with the baseplates for roughly half their height but even using PLA they are surprisingly strong. To make sure they are robust as possible I have placed a lug for almost every corresponding bin to spread the load.