1 / 1
Tamiya Grass Hopper Front Wing and Bumper Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a front wing set for the Tamiya Grass Hopper designed for the Poor Boys RC Speed Run Challenge 2025.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These models were printed at 0.2mm layer height using Prusament PC Blend.
You'll need to print the following:
1 x Front wing part
1 x Bumper Mount
1 x Endplate
1 x End Plate mirrored in the X direction
The gurney flaps helps if you stand up on end, the narrowest part down to the bed and with a 5-8mm brim.
1 x Gurney high
1 x Gurney high mirrored in the X direction
1 x Gurney low
1 x Gurney low mirrored in the X direction