PS5 One Handed Clip On Adapter - Left Handed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to use your PS5 Controller with just your left hand
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 79
- Makes
- 0
- Views
- 470
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The textured pad on the end of the joystick arm rests on a desk or your leg and the controller is moved around to move the right stick. The levers on top allow you to flick up with your middle and index finger to control L1, R1, R2 and L2. The button extenders mirror the face buttons, but bring it close to your left hand for easier access. Video assembly and design updates linked below.
Print in PLA Pro or PLA+ (I find Elegoo PLA+ works great). Can be printed in PETG but the face button and Options button extenders need to be PLA Pro or +. PETG is too flexible for them and PLA + has a good mix of strength and rigidity for the whole of this print.
Printer: Bambu P1S
Gyroid infill 30% for "main body" and "joystick arm"
Gyroid infill 40% for all other parts.
Normal auto generated supports for options button lever.
Tree auto generated supports for the rest of the parts.
Wall loops - 4 for all objects.
Set the Threshold angle for the supports to 49% when printing the options button extender. Otherwise, the support will not print underneath the part that touches the button. I typically have my threshold angle set to 49% for all parts anyways and it works fine.
Objects are already properly oriented for best print quality if you use the 3MF in Bambu Studio
If you would like me to print one for you, check out these links:
https://www.ebay.com/itm/146730355193
IG: https://www.instagram.com/criticallayer3d/ - gameplay vids
Youtube: https://www.youtube.com/@CriticalLayer3D - gameplay and assembly vids
Some Dark Souls 2 Gameplay:
Assembly and Install Guide: