1 / 3
SV06 Plus BTT Eddy Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for BigTreeTech Eddy probe that fits SV06 Plus toolhead
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 21
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a mount for the BigTreeTech Eddy probe (both types), tailored specifically for the Sovol SV06 Plus. The mount does not utilize the screws supplied with the probe. Instead, it requires:
- 2x M3x20 (SHCS) or (BHCS) - either type fits
- 2x M3 hex nuts
It can be printed in PETG, but for better durability and heat resistance, ABS, ASA, or higher performance materials are recommended.
My print settings:
- 4 perimeters
- 30% infill
Probe offsets:
- X: 30 mm
- Y: -25 mm
Make sure to update your printer.cfg with the new offsets.
The probe works well with the Eddy-ng firmware. Calibration using a drive current of 16 for both TAP and mesh bed leveling works perfectly.