1 / 5
Mount for ESP32 Relay X8
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat wall mount a "ESP32 Relay X8" board. The board can be fixed to the mount using 4x M3*8 bolts.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 112
- Makes
- 0
- Views
- 529
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Flat wall mount a "ESP32 Relay X8" board. The board can be fixed to the mount using 4x M3*8 bolts, these bolts fit snug in the 3,4mm diameter holes. The mount can be attached to a wall or desk using normal screws. A center nibble makes shure the board does not bent while pressing on the wireclamp screw holes.
The board I use is a ESP32_Relay_X8 (303E32DC810) which can be found here <https://www.aliexpress.us/item/1005002231689053.html>
This is part of my floor heating setup.