1 / 9
Magnetic brine shrimp (Artemia sp.) cysts separation accessories — image 1
1 / 9

Magnetic brine shrimp (Artemia sp.) cysts separation accessories

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a collection of items, we use to harvest brine shrimp nauplii from cysts with a magnetic outer coating.

Rating
0 / 5
Likes
4
Downloads
8
Makes
0
Views
388
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

These are parts we use for hatching and harvesting brine shrimp (Artemia sp.) nauplii from magnetized cysts for feeding our sea anemones.

We use these magnetized brine shrimp cysts: INVE EG SEP-ART D-FENSE: Magnetic Brine Shrimp Eggs (from, e.g., algaebarn.com) and hatch them in a 20-L brine shrimp hatching cone (Aquaneering - ZHBS20) which includes an acrylic lid with a wide center hole. The .stl files include a lid for the egg can to be printed in TPU for a somewhat airtight seal once opened.

The outer tube is the only part of the assembly that comes into contact with the seawater. The magnetic rod can then be inserted into it for separation of the unhatched cysts and empty shells during collection. Afterwards it can be removed so that the material can be rinsed off easily and the outside of the tube can be cleaned before storage or the next hatching. 

For the outer tube, cut a clear, rigid PETG tube (1-¼″ OD × 1-1/8″ ID, McMaster-Carr - 9245K41) to ~21″ length and sealed it off at the bottom with the end plug and epoxy adhesive to be watertight. Then the fixation ring needs to go on the tube first (thread oriented upwards). Subsequently, the tube can be positioned through the hole in the hatching cone lid and the fixation top can be secured close to the very top of the tube (thread downwards), with a good print, it should be purely a friction fit. Then, the lid can be moved so that the fixation top goes through the hole and the fixation ring can be screwed on to keep the hole tube in position. 

For the magnet rod, 12 Neodymium magnets (N52, 1″ long x 1/2″ wide x 1/2″ thick, magnetized through thickness, from e.g., K&J Magnetics - BX088-N52) are required. WARNING: These are very strong magnets which need to be handled with care to prevent injuries, Neodymium magnets are also very brittle, if they smash together, shards will break off. 

Each magnet is placed in one of the casings and retained in place by screwing on the thin lid plate loosely (so it touches the magnet but does not prevent it from rotating freely). Do this for all 12 magnets, then screw the individual cases together tightly. The bottom casing can be used for aesthetics, the only difference is that it doesn't have an outer thread. Screw the control rod on top. Everything should be tightly connected and there should be no wiggling. Store at a clean place away from any loose metal when not in use. 

For harvesting brine shrimp nauplii, just insert the magnet rod into the outer tube, remove the airline from the hatching cone and wait 10-20 min for most empty shells and unhatched cysts to stick to the magnets (there will be only empty shells at the water surface which don't get attracted to the magnets and are dealt with later). Slowly open the bottom valve and collect the nauplii with a brine shrimp net (150-µm or smaller mesh size), partly close the valve before all the cysts from the water surface reach it. Rinse the nauplii with de-ionized water and transfer them into a 1-L Imhoff cone with an airline to the bottom and moderate bubbling. Use for feeding over the same day, then dispose. Once the nauplii are collected, remove the magnet rod from the outer tube. Rinse the outer tube with de-ionized water, wipe it down with 70% ethanol, then do one more water rinse and put aside. Drain the remaining liquid from the hatching cone and do a thorough cleaning before either starting the next batch of hatching or bleaching and drying it.

All parts except the can lid should be printed in PETG with a 0.2-mm layer height, three perimeters and all-solid infill (the control rod can be printed with a 25% or higher infill as it is not as mechanically and/or chemically stressed as the other parts).

The can lid was printed using FilaFlexible 40 TPU (Shore D hardness of 40) with 0.2-mm layer height, three perimeters, 25% gyroid infill and five solid top and bottom layers.