Halter für PSU-Lüfter im Tukkari Enclose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Um die PSU bei Bedarf kühlen zu können, habe ich einen Halter für einen 40mm Lüfter konstruiert.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 3
- Views
- 402
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Die Temperatur im Tukkari liegt bei PLA und PETG eigentlich immer unter 40°. Auch das Netzteil war bisher maximal handwarm. Trotzdem habe ich einen 40mm USB-Lüfter angebracht, um bei höheren Temperaturen die PSU zusätzlich kühlen zu können.
Konstruiert mit Fusion360.
Update 14.04.2022: ich habe die Fusion-Datei hinzugefügt
The temperature in the Tukkari is always below 40° with PLA and PETG. The power adapter was also at most lukewarm. Nevertheless, I installed a 40mm USB-fan to be able to cool the PSU at higher temperatures.
Constructed with Fusion360.
Update 14.04.2022: I added the fusion file