Honest John Model Rocket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a easy to print and fly Honest John that will fly more thant 1000' on an 18mm motor!
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 66
- Makes
- 0
- Views
- 295
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Honest John Model Rocket
The Honest John is one of my most favorite rockets, I had one in my first collection of model rockets back in 60s.
This one is based on the Estes BT-50 tube and the Airframe can be replaced with a BT-50 but you can also just print the Airframe section. Keep in mind the BT-50 tube will last longer as the printed airframe is more likely to break along the build plane.
Currently there isn't a printed mount for the shock cord for the airframe. My thought for this is either drill a small hole to thread kevlar thread or if you go with the paper BT-50 body tube, glue the shock cord to the interior wall (classic method).
If you feel you need to add nose weight to get the balance you want, there is holder you can put inside the nosecone that will allow you to easily add the weight.
The threaded shoulder of the nose cone has a passage for attaching the shock cord.
You might notice that I opted to put a groove in the curve of the nose, to allow for launch rod clearence. I don't like stand-off launch lugs you typically find on these. The model files are included, if you want to tweak it to use stand-off launch lugs.



