PDL/Clipsal Iconic Recessed Switch Holder for Paint/Stopping
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A temporary plate to hold PDL/Clipsal Iconic switch modules behind the finished wall surface while painting/stopping.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
This plate allows temporary mounting either one or three PDL/Clipsal Iconic series switch modules while you are painting or gibstopping. It holds them behind the finished wall level inside a regular sized gib/plasterboard cut-out, so the switches don't get painted. They remain usable so you can keep the lights on. They should ideally be printable with a self-extinguishing filament like the UL-listed Prusament PETG v0. Use the short screws from a mounting block if you have them, or else the regular length screws will work.
Prints without supports, and 0.2 or lower layer height is fine. The small detents that hold the switch modules may not work well with a large layer height.