Shuko socket with Shelly module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case can hold 2 shuko sockets and a Shelly module (to switch, manage or monitor the sockets).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This case can hold 2 shuko sockets and a Shelly module (to switch, manage or monitor the sockets).
For the lid I used M3 inserts and screws. For the sockets you can use fastscrewers 3,5x15 (-ich) or M3 screws and nuts.
The cable Glands I used are the PG9.
The seal is optional, you can close the lid without it. But If you need waterproof, I would recommend it, as the shuko sockets and the cable glands come with seals.
I can (on request) make holes on different sides (one or more per side).
Printed with PETG, 50% infill (Gyroid) and support for the side-holes.