1 / 2
Tessories Tesla Model 3 Glass Roof Sunshade Clip — image 1
1 / 2

Tessories Tesla Model 3 Glass Roof Sunshade Clip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement clips for Tesla Model 3 glass sunroof sunshade available on Tessories.uk .

Rating
0 / 5
Likes
11
Downloads
66
Makes
0
Views
403
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

A replacement clip for the Tessories Glass Roof Sunshade. 

USE AT YOUR OWN RISK: I accept no liability for any damages caused to property or people as a result of this replacement part failing, or otherwise not performing as expected for any reason - not limited to the design, the print quality or material. 

 

Tessories sell their own replacement clips: Tesla Sunshade Replacement Clips for a very reasonable price, which I would recommend using instead of this model. 

 

Disclamers out of the way, this replacement clip is a slight improvement on the stock clips - it provides an ever so slightly wider and a tighter fit, and you can print as many of them as you wish to secure the sunshade. The are installed exactly the same as the stock clips and are similarly discrete once installed (providing you don't print them in neon pink filament, of course). 

Recommended Printing Parameters:

  • Prusament PETG or ABS (do not use PLA or other material with a glass transition temperature below 60C - it can get quite hot under the glass!)
  • 0.2mm layer height
  • 0.4mm nozzle
  • 3 walls - no infill (shouldn't be required)
  • Brim enabled
  • No supports (only bridging)
  • Print in the orientation supplied. 

 

Risks

I would encourage you to think about the following potential risks when printing or using this clip (or indeed any other clip):

  • Heat could cause the part to degrade, leading to mechanical failure.
  • Heat could cause the part of melt, possibly damaging the car or shade. 
  • Improperly sized or fitted clips could come loose whilst driving. 
  • If driving on a high speed road, the shade may be buffetted by wind from an open window. 

 

Make special consideration of:

  • The appropriate material for the part for heat resistence and strength.
  • That your printer is well maintained and produces solid and dimensionally accurate parts. 
  • The clip has a snug and secure fit before committing to using it. 

Tags