HP 120W PSU - Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.21 – €1.47 net (excluding VAT)
For file: HP120W_PSU_Mount_2x_PETG.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.34 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.25 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mounting brackets for the not rounded version of the HP 120W PSU, or all PSUs 69mm wide and 25mm thick. No support model
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Just a simple bracket for PSUs 69mm wide and 25mm thick, like the not rounded version of the HP 120W PSU.
This model prints without supports, just make sure the pointy bits of the holes are pointing up.