DBS 150 - TPU Sleeve and Bumper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Accessory TPU sleeve and TPU bumpers for DBS-150 telescope.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These three stl models are designed to compliment the DBS-150 telescope. The larger stl sleeve model is designed to be printed in TPU and stretch slightly over the rear of the telescope. The TPU Bumpers are designed to firmly secure the TPU sleeve and also provide contact surfaces to set the telescope on and protecting the mirror tilt knobs. The final stl is an insert for the telescope carbon tubes so that you can secure the TPU bumpers to the telescope. The Carbon tube M4 inserts are glued into the inside of the carbon tubes using epoxy.
The bolts are M4.
The TPU is translucent Red 95d
Printed at 300 micron layers. 4 layer thickness all sides. 25% infill.