1 / 2
Buzzbee Pixelator 16 mm breech adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A barrel adapter for the Buzzbee Pixelator that holds a 16mm OD barrel
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
3D model description
This adapter can accept a 16mm barrel and is drop in for the Buzzbee Pixelator. *Anodized barrels will have a tighter fit
Will require 1 short 4-40 screw. ( the countersunk one commonly used in slug hardware kits) and a pusher breech to load darts.
Message me with feedback! :)
3D printing settings
15-25% Infill
Standard heat and bed temp for PLA for your printer.
tested on a Bambu labs X1-Carbon.
highly recommend printing this in orange, or at least the tip if you can do multi-colored prints.