dji mic mini holder and handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a full form wireless microphone so I made this thing.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 80
- Makes
- 0
- Views
- 710
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
I recommend 3 perimeters and at least 25% infill. I used pla+ but you could probably use any filament. There is a small overhang so be mindful of that
It requires a 1in long ¼-20 bolt with the head cut off or a 3/4in long ¼-20 stud.
It has a handle that is the same size and form factor as a standard wired microphone (minus the wire so it feels somewhat small) as well as a larger wireless style microphone. The head of the microphone holds a dji mic mini using the existing clip on the microphone and fits a 1.5 in (internal diameter) foam cover if you want it to look like a regular microphone.