1 / 4
Breacher Side Saddle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carry 8 Silly shells for double loading the Breacher
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 108
- Makes
- 3
- Views
- 928
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Carry 8 Silly shells for double loading the Breacher.
Requires:
- 2 M3 nuts
- 2 M3x30mm Bolt
Print 2 sets of parts (left and right). 135 deg is the stock tightness. Print the right piece out first and test fit then print out remaining parts.
I did 0.28mm layer
5 walls 20% infill.
Put it on the blaster where you want. Insert nut into cavity. Has a bump for the nut to stay locked in. Use the screwdriver to push the nut in.
See it in action here: