Pivot Window
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Puzzle called "Pivot Window" from the "No Problem Puzzles" Collection
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 68
- Makes
- 2
- Views
- 189
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Pivot Window
The 2x3x4 box of Pivot Window has a 2x3 lid that can turn around a central axis. This axis can move over three-quarters of the length of the box. This creates a very dynamic entrance to the box. The goal is to pack five tetracubes. Once a few pieces are in, the movement of the lid is severely limited. We found two solutions.
Printing Instructions
Print one of each piece. After printing make sure that the axis on the window piece is clean and easily slides inside of the grooves of the box. If needed scrape a bit off of the axis. Slide the window into its groove and glue the lid onto the box and you are all ready for puzzling.
Difficulty
3 out of 5
The Printable Puzzle Project
The Printable Puzzle Project aims to make available high-quality open-source models of many puzzle designs. All of our models are posted with the generous permission of their designers and are licensed for **non-commercial** use only. Anyone may print copies for their own personal use, but selling or otherwise monetizing them is not permitted, and puzzle designers retain all rights as copyright holders of their work.
Our puzzles are modeled using the open-source puzzlecad library. The .scad file is included with this model in case you want to modify any of its design parameters; more information on how to do this can be found in the PPP Puzzle Modeling tutorial.
The "No Problem Puzzle Collection" contains many puzzles with complicated boxes that would be too hard to model using open-scad. Additionally the original design files for the boxes have been lost due to a hd-fault. That is why these puzzles only contain scad-files for the pieces.
About The Designers
From November 2020 to April 2023 Theo Geerinck and Symen Hovinga collaborated under the trading name of "No Problem Puzzles" to design and produce their puzzles. Many of their unique packing puzzles introduce fascinating features such as moving or sliding doors and elements. These features and the way they behave always add a playful new dimension to the more familiar exercise of packing shapes. Those puzzles could once be purchased through an online printing service. Alternatively, for those who owned a 3D printer the files could be obtained from Symen.
However, after the tragic loss of Symen, purchases through the ‘No Problem Shop’ was no longer possible. Therefore, Theo decided to publish the designs so that everybody can create 3d-printed copies to be enjoyed for personal use.