1 / 4
Garmin Quarter-Turn Mount Base for SoRider mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Garmin Edge quarter-turn mount base for SoRider handlebar mount, two-screw installation
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 325
- Makes
- 0
- Views
- 677
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Garmin Edge quarter-turn mount base for SoRider handlebar mount, two-screw installation.
Print Settings:
- Layer Height: 0.15mm
- Infill: 15%
- Perimeters: 4
- Material: Prusament PETG Black
- Supports: for supports enforces only with automatic painting
- Orientation: Print flat side down for best surface finish
Hardware Required:
- 2xM3 from the original SoRider mount
Note: This is a mounting base only. Whole mount not included.
P.S. my first ever 3D model