1 / 2
Table top corner protectors
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Table top corner protectors for transportation.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I needed corner protectors for transporting a table top, ended up designing these. You need two per corner, print on the flat side without supports.
These will work for boards of 20mm thickness or more as the inset part is 10mm deep.
Sandwitch the table corner and use zip ties, you can use dual sided adhesive tape for added stability.
Printing
- PLA or PETG
- Nozzle: 0.4 mm
- Layer Height: 0.2 mm
- Infill: at least 15%, but I recommend 25%
- Vertical Shells: 3
- Top/Bottom Layers: 5
- Supports: No