308WIN 10 Rounds magnets box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I offer you my version of a box for 10 cartridges .308 Win. The box closes with neodymium round magnets
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
Hi folk
I offer you my version of a box for 10 cartridges .308 Win.
The box closes with neodymium round magnets. The magnet size is 8X3, but you can also use smaller magnets, I just had these magnets bought for another project.
I used PLA. It prints without problems with standard settings. The box turns out strong, but if you have doubts, you can add perimeters.
Screw m3x25 and nut m3
Now about the model itself.
There are hidden magnets in the lid and in the insert. I decided to hide them because I don’t like the metal debris sticking to it in the open version. This complicates printing a little, but it’s worth it.
Take two magnets and fold them as shown in Fig. magnets and put dots with a permanent marker on opposite sides (fig. magnets)
The model consists of 3 parts and two additional ones (optional)
1. box - with standard settings.
2. the lid is printed on standard settings in the position as shown in the LID picture. at a print height of 11.60 mm, add a pause in the slicer. start printing and when the printer stops, insert the magnet into the hole with the side without a dot facing up and then continue printing.
3. the insert is printed on standard settings in the position as shown in the Insert picture. at a print height of 4.00 mm, add a pause in the slicer. start printing and when the printer stops, insert the magnet into the hole with the side with a dot facing up and then continue printing.
4. the round plug will cover the screw hole. (optional)
5. the second plug will cover the nut hole. (optional)
I printed the box on Prusa MK3.5S
Happy prints!