EGGvac Mini - for BGE mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attachment for shop/ash vacuum for cleaning the Big Green Egg mini via the bottom vent.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed an attachment for my ash vacuum to clean my Big Green Egg Mini. The standard hose nozzle was too big for the small bottom vent of the Egg.
This model fits shop or ash vacuums with a 38 mm outer diameter attachment. The vacuum I use for my grill: https://www.amazon.de/dp/B07JBR9ZCM
I printed mine on my CoreONE and split it into two pieces due to the Z-height limitation. Both the split version and the one-piece version are included in the files in case your printer has a large enough Z-height. The layers provided enough friction, so i didn't needed glue for assembly.
If you have vacuum with a different diameter, you can simply print the upper nozzle part and design a simple custom connector to fit your vac.
I used ASA for printing, but other materials should work as well. Heat resistance isn't critical, as hot ashes should never be vacuumed.
I recommend printing with a large enough inside brim for stability.
I recommend using the .3mf file, as the lettering was added in the slicer and is not included in the stl. Also it has already added modifiers for fuzzy-Skin. The .3mf is the 2pcs version.
*the photo shows an older version of the model, the new model is slightly taller an the lettering looks better.