1 / 4
Fractal Ridge Mid-Century Modern Feet — image 1
1 / 4

Fractal Ridge Mid-Century Modern Feet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mid-Century Modern Feet for the Fractal Ridge

Rating
0 / 5
Likes
13
Downloads
98
Makes
0
Views
670
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

Mid-Century Modern Feet for the Fractal Ridge

 I picked up the Fractal Ridge case because of its sleek, Hi-Fi-inspired design—but I quickly found myself unimpressed with the standard horizontal feet. They didn’t do justice to the aesthetic I was going for. So, I designed my own mid-century modern feet to complete the look—and unexpectedly, I got a major bonus: dramatically improved thermals.

Turns out, the stock feet block a significant amount of airflow. With my custom design, airflow from the underside is much less restricted, helping the system breathe easier.

🛠 Assembly Instructions Here’s how to install the feet:

What You’ll Need

  • 4x M3 screws (any length over 5mm should work fine)
  • All printed parts

Steps

  1. Attach the top piece of each foot to its base.
  2. Open the bottom panel of the case.
  3. Locate the mounting points: from the side edge, count 5 holes over and 3 holes down.
  4. Insert and secure the screws through the printed feet into the case.
  5. Tighten everything up—and admire your stylish new setup.

Tags