Polydryer connect drying dock when wall mounted
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connect the drying dock to the Polydryer Box when it's mounted on the wall with the "wall mount" by Polymaker
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 1
- Views
- 253
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Connect the drying dock to the Polydryer Box when it's mounted on the wall with the "wall mount" by Polymaker
I printed with PETG Speed setup at a layer height of 0.2 mm with supports.
Rotate the Brackets by 45° on the print bed and you will need to print two shackles.
Mount the shackles in Bracket 1, hang it in the box, place the heater unit under the box, and connect Bracket 2 with the shackle.
Turn the heater unit and place it backwards on the box. Unfortunately, the box does not come with an angled power cable and there is not enough space at the back.
Be careful not to drop the heater unit!
Let me know what you think! For me, it's working perfectly.