1 / 5
Corvette - 1980-1982 Tail Light Adapter for 1977 Tail Lights — image 1
1 / 5

Corvette - 1980-1982 Tail Light Adapter for 1977 Tail Lights

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a set of printables for successfully mounting 1977 Tail Lights in the 1980 - 1982 Corvette rear bumper.

Rating
0 / 5
Likes
8
Downloads
22
Makes
1
Views
272
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

This is a set of printables for successfully mounting 1977 Tail Lights in the 1980 - 1982 Corvette rear bumper.

Print the hole template using draft mode out of PLA.  Use the small hole to secure the template to the car, so it doesn't move around.  Drill the center hole using a 3" hole saw.   Unscrew the holding screw, flip the template around, and screw it in again.  Use ¼" long drill bit to drill out the four bolt holes.  Be sure to use a long drill bit, so that you don't damage your bumper with kickback.

Hold down bolts are 1/4-20 x 3/4" Flanged Hex Head Bolts Flange Hexagon Screws

Nuts I used are 1/4-20 Zinc Plated Serrated Flange Hex Lock Nuts (BCP269)

I used M4 heated inserts on the posts with M4 bolts to attach the tail lights.

Tags