scientist girl swirly glasses
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
prop glasses based upon the swirly glasses scientist girl archetype
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
Some things are cliche for a reason!
I printed mine at 0.08mm layer height, so I am unsure how other resolutions would look. The lenses are replaceable, and are held in place by 6x2mm magnets (got mine on amazon). 6 magnets are required for the frame, and 3 glasses are required for each lens (12 for a pair with one set of lenses).
Hinges must be attached to the frame using glue, same with the magnets to the frame and lens. Make sure that your magnets are inserted in the right direction, as they won't snap into place otherwise.
As one can infer, there is absolutely no visibility through the lenses with the inserts glued in.
In order to assemble, glue hinges onto the frame, with the circle facing back from the front of the frame (part with magnet inserts).
Line up the holes in the legs with the hinges, then insert the pegs, gluing them to ensure they are fashioned. If the holes printed poorly, sanding might be necessary.
Glue magnets into lenses and frame. Once dried, the lenses should be aligned by the magnets.
(Optional) Glue the swirls into the lenses, for a more complete look at the cost of visibility.