1 / 12
Adapter: Cen-Tec QuickClick [32mm/1.25"] -to- WEN Drywall Sander — image 1
1 / 12

Adapter: Cen-Tec QuickClick [32mm/1.25"] -to- WEN Drywall Sander

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapts the WEN Drywall Sander [Model DW5062] to the Cen-Tec 32mm QuickClick System

Rating
0 / 5
Likes
4
Downloads
15
Makes
0
Views
159
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

This adapter allows the WEN Drywall Sander [Model DW5062] to easily connect to the Cen-Tec 32mm QuickClick System. I utilized a tight slip-fit that allows the WEN's swivel mechanism to fully function. I've use this extensively while remodeling my condo, with zero issues. It fits very snugly, yet is removable with moderate effort.

I'd suggest printing in PETG, ASA, or ABS.

 

-----

Printed on an AnkerMake M5C-B using ~35g of Creality CR-PETG (Grey) in 1hr 19min with the following settings [AMStudio]: 0.4mm nozzle, 0.20mm layers, 100% Concentric infill [superseded by wall count], 9 layer (walls), 7 layers(top/bottom), Concentric top layer & bottom layer patterns, Concentric Ironing, grid supports, no brim.

 

Tags