1 / 2
Keyboard Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Compatilibty
- Works for the EPOMAKER EP64 by default.
Dimensions
- Overall: 293.90 x 103.599 x 18.20 mm
- Slot Lip: 287.80 x 97.50 mm
Assembly
- Print 2x Half-Piece and 1x Connector
- The three pices can be slid together and secured using tape or glue.
Print Settings
- Orientation: Flat side down
- Material: PLA, PETG, ABS, etc.
- Layer Height: 0.16mm or 0.2mm
- Infill: >20% - Any Pattern
- Supports: On (if you want a smoother base overhang)
Customization
- Includes a .f3d file with multiple parameters to adjust the sizing if needed.