HP t620 & t620 plus - Rack stack mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These mounts are intended to wrap around the outside of the t620, and interlock with the next stacked horizontal t620(+)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 377
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
These mounts are intended to wrap around the outside of the t620, and interlock with the next stacked horizontal t620 & t620 plus. As these (except the t620 plus) are passively cooled, I found when I have these stacked horizontally there is some heat generated. This bracket allows for some cooling and organisation.
PETG/PLA
20% infill
Infill: lines
BPA: Brim - inside only (easy to slice out with a knife)
--------
In the plus version I removed all the cut outs due to print quality, and controlling material use with infill % in slicer.