1 / 6
Tripp Lite BC600R UPS 1U Mount for DeskPi RackMate — image 1
1 / 6

Tripp Lite BC600R UPS 1U Mount for DeskPi RackMate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

10 inch 1U server rack mount for the Tripp Lite BC600R UPS designed specifically for the DeskPi RackMate T0 or T1

Rating
0 / 5
Likes
7
Downloads
89
Makes
0
Views
524
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

This is a mount for the Tripp Lite BC600R UPS so that it can be mounted in the bottom of the DeskPi RackMate T0 or T1 server rack. This UPS is the perfect size for the RackMate T0/1 and provides up to 300W of power for small form factor PCs. The bottom plate is designed to sit in between the rails and provide a flat surface for the UPS to sit on. There are four shallow holes in the top of the plate for the feet of the UPS to sit in. Combined with the front mount, this locks the UPS in the rack and keeps it from shifting around.

Notes

  • This mount only works in the bottom of the of the RackMate T0/1, it does not work anywhere else.
  • The front-to-back spacing of the UPS feet are not the same left to right, if the UPS is not sitting in the holes try rotating the bottom plate 180 degrees.
  • This mount might also fit the BC350R but I don't have one to test. 

Printing

  • Both parts can be printed without supports, print the front plate on its face.
  • PLA or PETG should work fine, I used the following settings on my prints:
    • 0.4mm nozzle
    • 0.2mm layer height
    • 3 wall loops
    • 3 top shell layers
    • 3 bottom shell layers
    • 20% infill density

Tags